Spectroscopic and Mechanical Studies on the Fe-based Amorphous Alloy 2605SA1
DOI:
https://doi.org/10.29356/jmcs.v54i1.959Keywords:
Amorphous alloys, Mössbauer spectroscopy, annihilation of positrons, free-volume, defects, micro hardness, brittlenessAbstract
The Vickers micro-hardness of this alloy was unusually dependent on the heat treatment from 300 to 634K, inferring important micro-structural changes and the presence of amorphous grains before its phase transition. Once the alloy is crystallized, the microhardness is characteristic of a brittle alloy, the main problem of these alloys. Within the amorphous state, other properties like free-volume, magnetic states and Fe-Fe distances were followed by PALS and MS, respectively, to analyze those micro-structural changes, thermally induced, which are of paramount interest to understand their brittleness problem.
Downloads
References
2. Brenner, A.; Riddell G. J. Res. Natl. Bur. Stand. 146, 37, 31-34.
3. Luborsky, F. E. IEEE Trans. Mag. 17, 14, 1008-1012.
4. Klement, W.; Wilens, R. H.; Duwez P. Nature 160, 187, 869870.
5. Mader, S.; Nowick, A. S. Appl. Phys. Lett. 165, 7, 57-59.
6. Tsuei, C. C.; Duwez, P. J. Appl. Phys. 166, 37, 435.
7. Duwez, P.; Lin, S. C. H. J. Appl. Phys. 167, 38, 4096-4097.
8. Huang, D. R.; Li, J. C. M. Mat. Sci. and Eng, 11, A133, 209212.
9. Kui, W. H.; Greer, A. L. Turnbull, D. Appl. Phys. Lett. 14, 45, 615-616.
10. Wang, W. H. Progress in Materials Science 2007, 52, 540-596.
11. Ram, S. Current Science, 2004, 86(6), 832-838.
12. Liu, Y.; Wang, H. G.; Wang, R. J.; Zhao, D. Q.; Pan, M. X.; Wang,W. H. Science 2007, 315(9), 1385-1388.
13. Kirkgaard, P.; Eldrup, M. Comput. Phys. Commun. 172 3, 240255.
14. Brand, R. A. User´s Guide, Wissenschaftlich Elektronic GmbH 12.
15. Nakajima, T.; Nagami, I.; Ino, H. J. of Materials Science Lett. 16, 5, 60-62.
16. Hautojärvi, P.; Corbel, C. In Proceedings of the International School of Physics “Enrico Fermi”: Positron Spectroscopy of Solids, Editado A. Dupasquier y A. P. Mills Jr.; Technical Editor P. Papali, IOS y Ohmsha. 15, 491-580.
17. M. Nieminen, R.; Manninen M. J. In Topics in Current Physics: Positrons in Solids (12), Edited by P. Hautojärvi, 1a ed., SpringerVerlag 17, 145-195.
18. Wen-Deng, L.; Xiong, Y.; Lung, C. W.; Wang, S. H.; Guo, J. T. Materials Science Forum 15, 175-178, 339-342.
19. Cabral-Prieto, A.; García-Santibáñez, F.; López, A.; LópezCastañares, R.; Olea-Cardoso, O. Hyperfine Interactions 2005, 161, 69-81.
20. Vertés, A.; Korecz, L.; Burger, K. Mössbauer Spectroscopy, Elsevier Scientific, Budapest, 17.
21. Li, J. M.; Quan, M. X.; Hu, Z. Q. Appl. Phys. Letters 16, 69(11), 1559-1561.
22. Gubanov, A. I. Sov. Phys.-Solid State 160, 2, 468-471.
23. Tong, H. Y.; Ding, B. Z.; Wang, J. T.; Lu, K. J. Appl. Phys. 12, 72(11), 5124-5129.
24. Puska, M. J.; Nieminen, R. M.; J. Phys. F: Met. Phys., 13, 13, 333.
25. Eldrup, M.; in Defects in Solids, Edited by A. U. Chadwick, M. Terenzi, Plenum Publishing Corporation 16, 145-178.
26. Elliott, S.R., Physics of amorphous materials 2ª ed., Longman scientific and technical, New York, 1.
27. Brandt, W. Appl. Phys., 174, 5, 1-23.
28. Cizek, J.; Prochazka, I.; Kocik J. ; Keilova, E. Phys. Status Sol. (a) 17 (2000) 651-662.
29. Contreras-Vite , J. A., Tratamiento térmico de la aleación amorfa 2605SA1. Análisis de sus defectos y microdureza 200, Tesis de Licenciatura en Física. UAEM. Toluca, México.
30. Nieminen, R. M.; In: Positron Spectroscopy of Solids, Edited by A. Dupasquier and A. P. Mills Jr. IOS press 15, 443-489.
31. McKee, B. T. A.; Jost, A. G. D.; MacKenzie, I. K. Can. J. of Phys.,172, 50, (5) 415-420.
32. Seeger, A. J. Phys. F: Metal Phys.173, 6, 248-294.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.