Effect of the Structural and Electronic Properties of Rh/CeXZr1-XO2 Catalysts on the Low-temperature Ethanol Steam-reforming
DOI:
https://doi.org/10.29356/jmcs.v65i1.1244Keywords:
Reforming, ethanol, hydrogen, Rh, CeXZr1–XO2, CeO2Abstract
Abstract. Rh catalysts supported on CexZr1–xO2 (with x= 0-1) materials were synthesized by precipitation method. The influence of the two different cerium salt precursors, ammonium cerium(IV) nitrate and cerium(III) nitrate hexahydrate, over the structure and catalytic activity in steam reforming reaction was investigated. The synthesized catalysts were characterized by various techniques, such as N2 adsorption-desorption, temperature-programmed desorption, X-ray diffraction, Raman spectroscopy, diffuse reflectance UV-Vis, and X-ray photoelectron spectroscopy. The use of ammonium cerium (IV) nitrate as a cerium precursor resulted in solid CexZr1-xO2 solutions with improved oxygen mobility and specific surface area. The catalytic evaluation exhibited the support composition and structure impact on its activity and product yield. The Rh supported on Ce0.5Zr0.5O2 solid solution rendered the higher activity and H2 and CO2 yields among both series, related to improved oxygen mobility and greater Rh0 dispersion. The formation of surface defects adjacent to Rh clusters by strong metal-support interaction effect was suggested by Raman analysis. The close contact between the Rh0 site and oxygen vacancy could be favoring cyclic-like ethanol adsorption and favored the breaking of the C–C bond and further oxidation of adsorbed CO and CHX species.
Resumen. Los catalizadores de Rh soportados en materiales CexZr1 – xO2 (x= 0-1) se sintetizaron mediante el método de precipitación. En este trabajo se investiga la influencia de dos precursores de sal de cerio diferentes, nitrato de amonio cerio (IV) y nitrato de cerio (III) hexahidrato, sobre la estructura y la actividad catalítica en la reacción de reformado con vapor. Los catalizadores sintetizados se caracterizaron mediante diversas técnicas, tal como fisisorción de N2, reducción a temperatura programada, difracción de rayos X, espectroscopía Raman, reflectancia difusa UV-Vis y espectroscopía de fotoelectrones de rayos X. El uso de nitrato de amonio cerio (IV) como precursor de cerio dio como resultado la obtención de soluciones sólidas de CexZr1-xO2 con una movilidad del oxígeno y área específica mejorada. La evaluación catalítica mostró el impacto de la composición y estructura del soporte sobre la conversión y rendimiento de productos. El catalizador Rh soportado en la solución sólida Ce0.5Zr0.5O2 proporcionó la mayor actividad y rendimientos de H2 y CO2 entre ambas series, relacionados con la movilidad del oxígeno mejorada y mayor dispersión de Rh0. El análisis Raman sugirió la formación de defectos superficiales adyacentes a los grupos de Rh debido a fuertes interacciones metal-soporte. El contacto estrecho entre el sitio Rh0 y la vacante de oxígeno estaría favoreciendo la adsorción del etanol en configuración cíclica y favoreciendo la ruptura del enlace C-C y la oxidación de las especies de CO y CHX adsorbidas.
Downloads
References
Sherif, S. A.; Goswami, D. Y.; Stefanakos, E. K.; Steinfeld, A., Handbook of Hydrogen Energy. Taylor & Francis: 2014. https://books.google.com.mx/books?id=jGkLBAAAQBAJ
Bion, N.; Duprez, D.; Epron, F., ChemSusChem 2012, 5 (1), 76-84. DOI: https://doi.org/10.1002/cssc.201100400
Dou, Y.; Sun, L.; Ren, J.; Dong, L., In Hydrogen Economy, 2017; pp 277-305. DOI: https://doi.org/10.1016/b978-0-12-811132-1.00010-9
Chen, S.; Pei, C.; Gong, J., Energy Environ. Sci. 2019, 12 (12), 3473-3495. DOI: https://doi.org/10.1039/c9ee02808k
Wang, W.; Wang, Y. Q., Int. J. Energy Res. 2008, 32 (15), 1432-1443. DOI: https://doi.org/10.1002/er.145 9
Bepari, S.; Kuila, D., Int. J. Hydrogen Energy 2020, 45 (36), 18090-18113. DOI: https://doi.org/10.1016/j.ijhydene.2019.08.003
Ogo, S.; Sekine, Y., Fuel Process. Technol. 2020, 199. DOI: https://doi.org/10.1016/j.fuproc.2019.106238
Riani, P.; Garbarino, G.; Cavattoni, T.; Canepa, F.; Busca, G., Int. J. Hydrogen Energy 2019, 44 (50), 27319-27328. DOI: https://doi.org/10.1016/j.ijhydene.2019.08.228
Turczyniak, S.; Greluk, M.; S?owik, G.; Gac, W.; Zafeiratos, S.; Machocki, A., ChemCatChem 2017, 9 (5), 782-797. DOI: https://doi.org/10.1002/cctc.201601343
Damyanova, S.; Pawelec, B.; Palcheva, R.; Karakirova, Y.; Sanchez, M. C. C.; Tyuliev, G.; Gaigneaux, E.; Fierro, J. L. G., Appl. Catal., B 2018, 225, 340-353. DOI: https://doi.org/10.1016/j.apcatb.2017.12.002
Konsolakis, M.; Ioakimidis, Z.; Kraia, T.; Marnellos, G., Catalysts 2016, 6 (3). DOI: https://doi.org/10.3390/catal6030039
Sharma, P. K.; Saxena, N.; Roy, P. K.; Bhatt, A., Int. J. Hydrogen Energy 2016, 41 (14), 6123-6133. DOI: https://doi.org/10.1016/j.ijhydene.2015.09.137
Zhurka, M. D.; Lemonidou, A. A.; Kechagiopoulos, P. N., Catal. Today 2020. DOI: https://doi.org/10.1016/j.cattod.2020.03.020
Bilal, M.; Jackson, S. D., Appl. Catal., A 2017, 529, 98-107. DOI: https://doi.org/10.1016/j.apcata.2016.10.020
González Vargas, O. A.; de los Reyes Heredia, J. A.; Wang, J. A.; Chen, L. F.; Montesinos Castellanos, A.; Llanos, M. E., Int. J. Hydrogen Energy 2013, 38 (32), 13914-13925. DOI: https://doi.org/10.1016/j.ijhydene.2013.08.077
da Silva, A. M.; de Souza, K. R.; Jacobs, G.; Graham, U. M.; Davis, B. H.; Mattos, L. V.; Noronha, F. B., Appl. Catal., B 2011, 102 (1-2), 94-109. DOI: https://doi.org/10.1016/j.apcatb.2010.11.030
Liguras, D. K.; Kondarides, D. I.; Verykios, X. E., Appl. Catal., B 2003, 43 (4), 345-354. DOI: https://doi.org/10.1016/s0926-3373(02)00327-2
Melchionna, M.; Trovarelli, A.; Fornasiero, P., In Cerium Oxide (CeO?): Synthesis, Properties and Applications, 2020; pp 13-43. DOI: https://doi.org/10.1016/b978-0-12-815661-2.00002-5
Chen, L. F.; González, G.; Wang, J. A.; Noreña, L. E.; Toledo, A.; Castillo, S.; Morán-Pineda, M., Appl. Surf. Sci. 2005, 243 (1-4), 319-328. DOI: https://doi.org/10.1016/j.apsusc.2004.09.074
Wang, J. A.; González, G.; Chen, L.; Valenzuela, M. A.; Moran-Pineda, M.; Vázquez, A.; Castillo, S., React. Kinet. Catal. Lett. 2007, 90 (2), 381-387. DOI: https://doi.org/10.1007/s11144-007-4938-2
Barbato, P. S.; Colussi, S.; Di Benedetto, A.; Landi, G.; Lisi, L.; Llorca, J.; Trovarelli, A., Appl. Catal., A 2015, 506, 268-277. DOI: https://doi.org/10.1016/j.apcata.2015.09.018
Mattos, L.; Noronha, F., J. Catal. 2005, 233 (2), 453-463. DOI: https://doi.org/10.1016/j.jcat.2005.04.022
Diagne, C.; Idriss, H.; Pearson, K.; Gómez-García, M. A.; Kiennemann, A., C.R. Chim. 2004, 7 (6-7), 617-622. DOI: https://doi.org/10.1016/j.crci.2004.03.004
Maia, T. A.; Assaf, J. M.; Assaf, E. M., Mater. Chem. Phys. 2012, 132 (2-3), 1029-1034. DOI: https://doi.org/10.1016/j.matchemphys.2011.12.058
Hao, Y.; Yang, C.-K.; Haile, S. M., Chem. Mater. 2014, 26 (20), 6073-6082. DOI: https://doi.org/10.1021/cm503131p
Letichevsky, S.; Tellez, C. A.; Avillez, R. R. d.; Silva, M. I. P. d.; Fraga, M. A.; Appel, L. G., Appl. Catal., B 2005, 58 (3-4), 203-210. DOI: https://doi.org/10.1016/j.apcatb.2004.10.014
Rossignol, S.; Madier, Y.; Duprez, D., Catal. Today 1999, 50 (2), 261-270. DOI: https://doi.org/10.1016/s0920-5861(98)00508-2
Yashima, M., Catal. Today 2015, 253, 3-19. DOI: https://doi.org/10.1016/j.cattod.2015.03.034
Trovarelli, A.; Fornasiero, P., Catalysis by Ceria and Related Materials. Imperial College Press: 2013.
Kosacki, I.; Suzuki, T.; Anderson, H. U.; Colomban, P., Solid State Ionics 2002, 149 (1-2), 99-105. DOI: https://doi.org/10.1016/s0167-2738(02)00104-2
Gouadec, G.; Colomban, P., Prog. Cryst. Growth Charact. Mater. 2007, 53 (1), 1-56. DOI: https://doi.org/10.1016/j.pcrysgrow.2007.01.001
Oliete, P. B.; Orera, A.; Sanjuán, M. L., J. Raman Spectrosc. 2019, 51 (3), 514-527. DOI: https://doi.org/10.1002/jrs.5797
Cao, L.; Pan, L.; Ni, C.; Yuan, Z.; Wang, S., Fuel Process. Technol. 2010, 91 (3), 306-312. DOI: https://doi.org/10.1016/j.fuproc.2009.11.001
Wakita, T.; Yashima, M., Appl. Phys. Lett. 2008, 92 (10). DOI: https://doi.org/10.1063/1.2890718
Acharya, S. A.; Gaikwad, V. M.; D'Souza, S. W.; Barman, S. R., Solid State Ionics 2014, 260, 21-29. DOI: https://doi.org/10.1016/j.ssi.2014.03.008
Kainbayev, N.; Sriubas, M.; Virbukas, D.; Rutkuniene, Z.; Bockute, K.; Bolegenova, S.; Laukaitis, G., Coatings 2020, 10 (5). DOI: https://doi.org/10.3390/coatings10050432
Anjaneya, K. C.; Nayaka, G. P.; Manjanna, J.; Govindaraj, G.; Ganesha, K. N., J. Alloys Compd. 2013, 578, 53-59. DOI: https://doi.org/10.1016/j.jallcom.2013.05.010
Daturi, M.; Finocchio, E.; Binet, C.; Lavalley, J. C.; Fally, F.; Perrichon, V., J. Phys. Chem. B 1999, 103 (23), 4884-4891. DOI: https://doi.org/10.1021/jp9905981
Overbury, S. H.; Huntley, D. R.; Mullins, D. R.; Glavee, G. N., Catal. Lett. 1998, 51 (3/4), 133-138. DOI: https://doi.org/10.1023/a:1019086428874
Hashimoto, K.; Toukai, N.; Hamada, R.; Imamura, S., Catal. Lett. 1998, 50 (3/4), 193-198. DOI: https://doi.org/10.1023/a:1019047925723
Bernal, S.; Calvino, J. J.; Cifredo, G. A.; Laachir, A.; Perrichon, V.; Herrmann, J. M., Langmuir 1994, 10 (3), 717-722. DOI: https://doi.org/10.1021/la00015a020
Sheng, P. Y.; Yee, A.; Bowmaker, G. A.; Idriss, H., J. Catal. 2002, 208 (2), 393-403. DOI: https://doi.org/10.1006/jcat.2002.3576
Damyanova, S.; Perez, C. A.; Schmal, M.; Bueno, J. M. C., Appl. Catal., A 2002, 234 (1-2), 271-282. DOI: https://doi.org/10.1016/s0926-860x(02)00233-8
Kambolis, A.; Matralis, H.; Trovarelli, A.; Papadopoulou, C., Appl. Catal., A 2010, 377 (1-2), 16-26. DOI: https://doi.org/10.1016/j.apcata.2010.01.013
Liu, K.-Q.; Kuang, C.-X.; Zhong, M.-Q.; Shi, Y.-Q.; Chen, F., Opt. Mater. 2013, 35 (12), 2710-2715. DOI: https://doi.org/10.1016/j.optmat.2013.08.012
Sifontes, A. B.; Rosales, M.; Méndez, F. J.; Oviedo, O.; Zoltan, T., J. Nanomater 2013, 2013, 1-9. DOI: https://doi.org/10.1155/2013/265797
Gutiérrez?Alejandre, A.; Ramírez, J.; Busca, G., Catal. Lett. 1998, 56 (1), 29-33. DOI: https://doi.org/10.1023/a:1019076121915
Kuznetsova, T. G.; Sadykov, V. A., Kinet. Catal. 2008, 49 (6), 840-858. DOI: https://doi.org/10.1134/s0023158408060098
Barton, D. G.; Shtein, M.; Wilson, R. D.; Soled, S. L.; Iglesia, E., J. Phys. Chem. B 1999, 103 (4), 630-640. DOI: https://doi.org/10.1021/jp983555d
Corma, A.; Atienzar, P.; Garcia, H.; Chane-Ching, J. Y., Nat. Mater. 2004, 3 (6), 394-7. DOI: https://doi.org/10.1038/nmat1129
Patsalas, P.; Logothetidis, S.; Sygellou, L.; Kennou, S., Physical Review B 2003, 68 (3). DOI: https://doi.org/10.1103/PhysRevB.68.035104
Lin, Q.; Shimizu, K.-i.; Satsuma, A., Appl. Catal., A 2012, 419-420, 142-147. DOI: https://doi.org/10.1016/j.apcata.2012.01.021
Durap, F.; Zahmak?ran, M.; Özkar, S., Appl. Catal., A 2009, 369 (1-2), 53-59. DOI: https://doi.org/10.1016/j.apcata.2009.08.031
Korsvik, C.; Patil, S.; Seal, S.; Self, W. T., Chem. Commun. 2007, (10), 1056-8. DOI: https://doi.org/10.1039/b615134e
Damyanova, S.; Pawelec, B.; Arishtirova, K.; Huerta, M. V. M.; Fierro, J. L. G., Appl. Catal., A 2008, 337 (1), 86-96. DOI: https://doi.org/10.1016/j.apcata.2007.12.005
Moulder, J. F.; Chastain, J., Handbook of X-ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of XPS Data. Physical Electronics Division, Perkin-Elmer Corporation: 1992.
Maeda, K.; Lu, D.; Teramura, K.; Domen, K., J. Mater. Chem. 2008, 18 (30). DOI: https://doi.org/10.1039/b808484 j
Singh, N.; Mubeen, S.; Lee, J.; Metiu, H.; Moskovits, M.; McFarland, E. W., Energy Environ. Sci. 2014, 7 (3), 978-981. DOI: https://doi.org/10.1039/c3ee43709d
Mavrikakis, M.; Doren, D. J.; Barteau, M. A., J. Phys. Chem. B 1998, 102 (2), 394-399. DOI: https://doi.org/10.1021/jp971450p
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.